Suchergebnisse
Suchergebnisse 1-20 von insgesamt 37.
I have the same problem. In pc it's always flicker Thanks, Marco
Very interesting discussion. Is it possible to insert an image in the div block? For example: <li>With support for browser-based-scrolling by mouse-wheel, scroll-bars and touch-controls.</li> <li>Fully integrated into krpano as <layer> container element.</li> <img src="acb.jpg" alt="test image"> I can't link correctly the image. Where is my mistake, Marco
Hi Klaus, ...a Minor Release, but fantastic bugfix for camroll. I will send you an example. Thanks, Marco
Zitat von »klaus.krpano« Good question - I have added now a compensation for the camroll setting when controlling/panning the pano. Will be also there in the next release (1.20.6). Thanks Klaus for your answer and future update in new realese. This function is very important in the case of rotation of a dome, for the analysis of figures and frescoes. Please look at this link --> https://www.marcostucchi.com/Panoramiche…_CupolaGenerale Through a slider I want to allow rotation +180 degrees, -180...
hi all, interestng discussion. I also have a flat image (a cartographics map) and when I rotate the image it alters the behavior of the muose inside the view. My question: is it possible to alter the rotation of the image, but normally functionally keep the muose on the Cartesian axes? If I rotate the image by +45 or -90 degrees, the behavior of the muose is also altered. Thanks, Marco
Hi all, hi Klauss, I often integrate flat images into my projects, but today krpano does not support, oe better ... this works in VR too, but the image will be very very small. My question: is it possible to exclude a flat image when I use VR mode ... ? For example, when switching from normal view to VR mode, flat images are not displayed, as long there is not a easy solution a new krpano version. Thanks a lot, Marco
Zitat von »Scott Witte« Virtual tour image resolution seems significantly less in Firefox Reality than in the Oculus browser on the Oculus Go. View change while moving your head seems a little more "stuttering" as well -- lower frame rate. Anybody else experience this? Is there some setting either in the browser or in KRPano that could correct these issues? A Google search didn't seem to find any discussion suggesting these are known issues. I confirm...!!! when I use Firefox. I have exactly th...
Hi all, I have the same problem with this image with version 1.19-pr13. Marco
Hi Klauss, thanks for your reply. Marco
Hi Alexey, thanks for your reply. I also think the problem is in new skin design and VR. I have read the code in 'vtourskin.xml', but I understand where is the problem... between 1.18.6 version and 1.19-pr8 version. Now I created un new test, with hotspot elements; previous example used layer elments. Please see the difference in the attached images and check the link directly with the mobile devide. The hotspot elements are scaled if you use the 'distorted=true', but not if 'distorted' is set t...
Hi Klauss, I have a question about mobilescale setting. There are the difference between version 1.18.6 and 1.19-pr8. With krpano 1.18 versione all elements are correctly scaled, but with 1.19-pr8 the elements aren't scaled by default. In krpano documentation there is: •By default all krpano content on mobile devices will be scaled by 0.5. •To disable that scaling, set the mobilescale setting to 1.0. Obviously, I can you use the property device.mobile="0.5" for all elements in my xml project, bu...
Hi Klaus, hi all. I would like to report a problem with 1.19pr4. With the version 1.19pr4 the the buttons version does not scale correctly, while with version 1.18.5 - 1.18.6 it work very fine. I tested this example a sun Galaxy S7 Edge with Firefox and Chrome browers. Does anyone have the same problem??? Link: 1.18 -> http://www.marcostucchi.com/temp/vr18/a.html 1.19pr4 -> http://www.marcostucchi.com/temp/vr/a.html Thank, Marco
Hi all But someone uses CB Enabler for Gear VR...??? MArco
Hi Klauss, Thank you for your reply. Marco
Hi Klauss, in these days I did many tests. I thought that the problem was the phone (device, system, or browser side driver ...), but then I tested a new example with 1,020 Lumia with Windows Phone 8.1 that works very very fine... !!! with the same smartphone. Here the example: http://www.marcostucchi.com/temp/d/viewe….xml&html5=only Thanks to Matteo Visintanier for this example. This new example works very fine and your example unfortunately (http://d8d913s460fub.cloudfront.net/krpa…x.html?v=11...
I recently tested this link with http://d8d913s460fub.cloudfront.net/krpa…x.html?v=119pr3 (in first page of the Pre Realase 3 discussion) with Nokia Lunia 1020 with Windows Phone 8.1, but you noticed black lines between the faces of the cube ... ??? Please, see the attached images. I tried to change all the settings to set but the result does not change. What do you think about this strange behavior on Lumia. Thanks in advanced, Marco
Hi Klauss. I use Windows 10 in a new Pc, not a VM. Tomorrow I will do new check test , and I will send the results. I have this problem only with combination Windows 10 and M. Edge. Other brower works fine. Regards, Marco
Thank you for your response... Marco
Zitat von »Alexey Tkachenko« With 1.19.pr3, however, it uses Flashplayer in Chrome despite the html5:"prefer". Maybe I'm missing something... Zitat von »klaus.krpano« For local testing I would always recommend using a localhost server, e.g. like the krpano Testing Server. Hi all... I have the same problem of Alexey, but with the new Microsoft brower Edge in Windows 10, as are already documented in another post. This time, it was suggested by Klauss, I used the server localhost, but does not cha...
Hi all, Hi Klauss... I tested the new browser Microsoft Edge in Windows 10, but I noticed then setting the tag html5:"prefer" Microsoft Edge uses always the Flash player. Why this unexpected behavior...??? With Internet Ex. 11 in Windows 8 / 8.1 it work fine. What I'm wrong ??? Do you also have this problem ??? But if I utiizzo FireFox all function normally. Thanks in advance, Marco
Mittwoch, 18. Oktober 2023, 22:26
Zum Seitenanfang
