Sie sind nicht angemeldet.

CUBESTRIP Up, Down 90 degrees off?

Douglas Rhiner

Fortgeschrittener

  • »Douglas Rhiner« ist der Autor dieses Themas

Beiträge: 141

Wohnort: San Anselmo, CA

Beruf: Code-Slave

  • Nachricht senden

1

Dienstag, 1. Februar 2011, 18:37

CUBESTRIP Up, Down 90 degrees off?

I'm using Pano2VR to create the strips used.
In every strip type, Horizontal, Vertical, & 3x2 the "Up" is rotated 90 clockwise and the "Down" is rotated 90 counter-clockwise.

Anyone else experience this?

Anyone have a solution/remedy?

VN2009

Profi

Beiträge: 1 336

Wohnort: Duluth MN

  • Nachricht senden

2

Dienstag, 1. Februar 2011, 18:55

RE: CUBESTRIP Up, Down 90 degrees off?

Zitat von »Douglas Rhiner«

I'm using Pano2VR to create the strips used.
In every strip type, Horizontal, Vertical, & 3x2 the "Up" is rotated 90 clockwise and the "Down" is rotated 90 counter-clockwise.

Anyone else experience this?

Anyone have a solution/remedy?


pano2vr cubestrip must be read or set in a different orientation. krpano has its own cubestrip maker droplet. try that and you will probably be ok. it in the tools download.

Jarredja

Profi

Beiträge: 1 058

Wohnort: LA

  • Nachricht senden

3

Dienstag, 1. Februar 2011, 19:26

Have you tried using the rotate features for cubestrips?



<image type="CUBESTRIP">
<cubestrip url="cubestrip.jpg" />
<left strip="0" rotate="0" flip="" />
<front strip="1" rotate="0" flip="" />
<right strip="2" rotate="0" flip="" />
<back strip="3" rotate="0" flip="" />
<up strip="4" rotate="0" flip="" />
<down strip="5" rotate="0" flip="" />
</image>

Douglas Rhiner

Fortgeschrittener

  • »Douglas Rhiner« ist der Autor dieses Themas

Beiträge: 141

Wohnort: San Anselmo, CA

Beruf: Code-Slave

  • Nachricht senden

4

Dienstag, 1. Februar 2011, 21:31

VIN2009 and Jarredja,

Thanks for the replies.
I'll give both a shot later today.

hennzen

Anfänger

Beiträge: 11

Wohnort: Berlin, Germany

  • Nachricht senden

5

Mittwoch, 22. Dezember 2021, 14:03

Had same problem. I use PTgui v12.8 to convert my equirectangular images to cubestrips (6x1).

Unfortunately, Jarredja's solution did not work for me.

Solved it by changing the striporder:

Quellcode

 
1
2
3

<image>
  <cubestrip url="%$cubestripimage%" striporder="FRBLUD" />
</image>

Ähnliche Themen