Sie sind nicht angemeldet.

Oculus GO & KRpano

Lieber Besucher, herzlich willkommen bei: krpano.com Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

bhh

Schüler

  • »bhh« ist der Autor dieses Themas

Beiträge: 67

  • Nachricht senden

1

Mittwoch, 2. Mai 2018, 19:58

Oculus GO & KRpano

Ours arrived today. This looks like it is going to be the perfect KRPano/WebVR platform. Great price point and no hardware variation should make development a little easier. Looks like the same OS/software as the Gear and webvr.isgearvr is true on the Go as well. The FOV and other things are a bit different than the Gear however so things are going to need a little tweaking. Pretty impressed though! A side-by-side comparison of the Gear vs the GO is pretty striking actually and that is using the old Gear VR settings of:

overlap="1.00"
fov="112.0"
dist="0.95"
dist2="1|0|0|0"
ca="0.090"
vig="100"

I haven't done any experimenting yet with trying to tweek any of these but I assume we'll be able to dial it in even better. Are the correct figures for the Go published anywhere? Also curious what options are available to us(if any) to integrate the controller and controller clicks into scene navigation. It's going to make menu interaction way more intuitive!

Dieser Beitrag wurde bereits 10 mal editiert, zuletzt von »bhh« (2. Mai 2018, 23:20)

indexofrefraction

Profi

Beiträge: 1 362

  • Nachricht senden

2

Mittwoch, 2. Mai 2018, 21:44

hm how does it work with the oculus... can you just upload and run a normal krpano "website" ?
zFilter plugin -- zFlare plugin -- zSnapshot plugin

bhh

Schüler

  • »bhh« ist der Autor dieses Themas

Beiträge: 67

  • Nachricht senden

3

Mittwoch, 2. Mai 2018, 22:33

Yes, there is a browser just like the Gear VR.

reactors

Anfänger

Beiträge: 1

  • Nachricht senden

4

Freitag, 4. Mai 2018, 22:08

Just got an Oculus Go headset and wanted to make a VR tour with my v-ray renders - KRpano seems like the best way to go about it. Having downloaded the unlicensed version, I'm experimenting a bit with what's possible. Having previously used wired VR-devices and a custom VR panorama solution made in Unity, it's refreshing to work on such a focused platform. Still, does anyone know if there's any way to wrap a krpano presentation into an offline package, storing it in the headset? SSD retrieval of images combined with the multires fallback seems like a fantastic way of creating truly responsive, portable tours, but right now the perfect consumer grade wireless 360 headset is thetered to the speed of local internet.

GIOLETS

Schüler

Beiträge: 61

  • Nachricht senden

5

Montag, 7. Mai 2018, 09:33

I'm also very interested to know if is possible to integrate KrPano tours into a locad App on Oculus Go.

klaus.krpano

Administrator

Beiträge: 13 499

  • Nachricht senden

6

Montag, 7. Mai 2018, 12:14

Hi,

Zitat von »bhh«

and that is using the old Gear VR settings of:
Hmm... when you would need to change any setting there, it would mean the browser there doesn't supports the WebVR API...

Note - when there is a 'VR setup' button, then the browser doesn't provide the a WebVR API and krpano is only faking/poly-filling it (by manual tracking and manual lens-distortion).

Real WebVR API support would (should) be better - because then the browser could better utilize the hardware (better tracking, faster screen refreshes, headset-specific lens-distortion). But also note - in this case the browser itself is responsible for the correct VR rendering (regarding fov, lens-distortion and so on).

What browser is used there?
The 'Oculus Browser'?
In the GearVR that browser has WebVR support, so I normally would suspect it there too.

(Btw - I have also ordered a Oculus Go, but not received yet, so I can't say much myself about it yet).

Best regards,
Klaus

bhh

Schüler

  • »bhh« ist der Autor dieses Themas

Beiträge: 67

  • Nachricht senden

7

Montag, 7. Mai 2018, 18:50

Hi Klaus,
It uses the same browser as the Gear, the Oculus one, not the Samsung one. I just assumed that those 6 settings (overlap, fov, dist, dist2, ca, vig) needed to be set for every device and that KRPano was detecting the Gear/Ocusuls browser via "isgearvr" and setting those automatically. Since the physical/lens specs of the GO are different but KRPano thinks it is the Gear, I assumed those settings would need to be manually tweaked. If that is not the way it works, cool but I will say that while the overall image quality is much better on the GO, the depth of some things (rendered scenes) just feel a little "off" in GO compared to the Gear. It's hard to describe but it may just be the added clarity is just revealing more.


Anyway, its a pretty cool device and basically renders the Gear obsolete as far as I'm concerned.

Zitat von »klaus.krpano«

Hi,

Zitat von »bhh«

and that is using the old Gear VR settings of:
Hmm... when you would need to change any setting there, it would mean the browser there doesn't supports the WebVR API...

Note - when there is a 'VR setup' button, then the browser doesn't provide the a WebVR API and krpano is only faking/poly-filling it (by manual tracking and manual lens-distortion).

Real WebVR API support would (should) be better - because then the browser could better utilize the hardware (better tracking, faster screen refreshes, headset-specific lens-distortion). But also note - in this case the browser itself is responsible for the correct VR rendering (regarding fov, lens-distortion and so on).

What browser is used there?
The 'Oculus Browser'?
In the GearVR that browser has WebVR support, so I normally would suspect it there too.

(Btw - I have also ordered a Oculus Go, but not received yet, so I can't say much myself about it yet).

Best regards,
Klaus

klaus.krpano

Administrator

Beiträge: 13 499

  • Nachricht senden

8

Dienstag, 8. Mai 2018, 11:11

Thanks, good to know!

When isgearvr is set, it means a real WebVR-capable browser is used.

Best regards,
Klaus

Birdseye

Schüler

Beiträge: 125

Wohnort: De Haan

Beruf: Freelance Photographer

  • Nachricht senden

9

Dienstag, 8. Mai 2018, 15:06

Today I reveived my Oculus Go too.
Maybe a dumb question but I have no clue how to use it with our Krpano tours.
When I use the standard browser, the Vtour is only shown in a tiny window.
Is there a possibility to make/view our tours in a full 360 surrounding? Or do we have to use the 'isgearvr' option for this?

klaus.krpano

Administrator

Beiträge: 13 499

  • Nachricht senden

10

Dienstag, 8. Mai 2018, 15:08

When krpano and your vtourskin.xml are up to date, then there should be normally a big 'enter vr' button in the center of the screen... (but I don't have my Oculus Go yet and can't say that for sure)

Birdseye

Schüler

Beiträge: 125

Wohnort: De Haan

Beruf: Freelance Photographer

  • Nachricht senden

11

Dienstag, 8. Mai 2018, 15:37

OK, I will check that. Thank you Klaus.
Update: Simple as that :) Looking great in the Oculus Go!

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Birdseye« (8. Mai 2018, 15:49)

bhh

Schüler

  • »bhh« ist der Autor dieses Themas

Beiträge: 67

  • Nachricht senden

12

Dienstag, 8. Mai 2018, 15:54

We've using a highly modified version of the various XML files so I can't say with 100% accuracy that the original vtourskin.xml file will behave exactly the same but our transition to the GO was literally identical in every way to the GEAR, exact same interface, browser, etc., with the exception we had the old GEAR without the controller and the GO controller is a HUGE improvement over fumbling with a touchpad on the side of your head. I hope we eventually have a way of integrating the controller into KRPANO tours without having to create a standalone app. I did a little investigating and some of the buttons are triggering an onkeydown event but I haven't had a chance to dig in much beyond that.

Birdseye

Schüler

Beiträge: 125

Wohnort: De Haan

Beruf: Freelance Photographer

  • Nachricht senden

13

Mittwoch, 9. Mai 2018, 10:54

Did you manage to copy your Vtour to the O.Go device ?

jordi

Profi

Beiträge: 583

Wohnort: Barcelona

Beruf: creating ideas & coding them

  • Nachricht senden

14

Mittwoch, 9. Mai 2018, 11:30

Reading those lines above I could not resist ordering an oculus go *cool*
everpano.com step beyond 360

GIOLETS

Schüler

Beiträge: 61

  • Nachricht senden

15

Mittwoch, 9. Mai 2018, 11:54

I have received my Oculus Go yesterday.
All the Krpano tour works perfectly using the Oculus Browser inside.
Only seems a little bit different the angle of view and the perception of the distance to the objects in relation to VR Gear.

I ask again how are possible to download a krpano tour and execute from the device.
Also, perhaps, best option will be to realize a "krpano App" where to load our krpano ready Vr tour and visible from the Oculus store.
Would be possible in some way? Without to use Unity solution that require to rebuil all our tours?

Thaks a lot!

Luca

GIOLETS

Schüler

Beiträge: 61

  • Nachricht senden

16

Mittwoch, 9. Mai 2018, 12:51

I've just found this application that probably many of you already know, and that it seems exactly how I need.... just load a krpano tour and make and App locally stored on the device.
Unfotunately the App is not showed into the Oculus room...

https://www.vrtourviewer.com/

bhh

Schüler

  • »bhh« ist der Autor dieses Themas

Beiträge: 67

  • Nachricht senden

17

Mittwoch, 9. Mai 2018, 15:51

Zitat von »GIOLETS«

Only seems a little bit different the angle of view and the perception of the distance to the objects in relation to VR Gear.
That is exactly our perception as well. Very difficult to articulate exactly what the difference is, only that Something just feels a little "off" from the GEAR.

rebaj83

Fortgeschrittener

Beiträge: 254

  • Nachricht senden

18

Mittwoch, 9. Mai 2018, 16:14

Hi Everyone

Received my Go today :)


-"Enter VR" in the middle of the screen stands for "Undifined Enter VR", anyway it' not very handy as we already have the vr icon in the toolbar. is there a way to disable this button?

-In non VR mode the pointer of Oculus is very handy to navigate, but is disappear as soon as we enter VR mode, is there an option to keep it in VR mode?

-Distorted hotspots are not displayed in VR mode :(

-A tour with distorted hotspots is very jerky, although they are not show, but VR is OK with no distorted hotspots


Best regards

bhh

Schüler

  • »bhh« ist der Autor dieses Themas

Beiträge: 67

  • Nachricht senden

19

Mittwoch, 9. Mai 2018, 18:10

Looked a little more today at controller integration. Just being able to use the controller clicks to trigger menus and stuff would be a huge step forward even without the pointer in my opinion. It appears the "back" button on the controller is triggering a keycode 27 which is the escape key but the trigger button, thumb touchpad, etc. does not seem to be triggering any mouse or keycode events that KRPano can intercept and use as an input. At least in the current iteration/version.

a.pu

Schüler

Beiträge: 120

Beruf: software engineer, author of krpano syntax highlighting, bundler and style guide

  • Nachricht senden

20

Mittwoch, 9. Mai 2018, 21:35

Issues

Wow... there is already quite a discussion!

I've recieved my Go yesterday and have taken a look at tours.

Well... There seems a lot to be done. And I don't know by whom.

We can run krpano tours only inside default browser. No options here.

1. The tours look like they are rendered at much lower resolution in WebVR mode. Like 720p instead 1440p.
2. There is no controller support. It seems to me it should work like a mouse and not a touch device (in web mode). In VR it's not recognized.

And performance is not at it's best...

What can be done with all that?

P.S. Distorted hotspots work in 19.16.

Also what device variable is for it?
Go seems to be the very perfect device for krpano...

Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »a.pu« (9. Mai 2018, 21:47)

Ähnliche Themen