I'm using Pano2VR to create the strips used.
In every strip type, Horizontal, Vertical, & 3x2 the "Up" is rotated 90 clockwise and the "Down" is rotated 90 counter-clockwise.
Anyone else experience this?
Anyone have a solution/remedy?
I'm using Pano2VR to create the strips used.
In every strip type, Horizontal, Vertical, & 3x2 the "Up" is rotated 90 clockwise and the "Down" is rotated 90 counter-clockwise.
Anyone else experience this?
Anyone have a solution/remedy?
I'm using Pano2VR to create the strips used.
In every strip type, Horizontal, Vertical, & 3x2 the "Up" is rotated 90 clockwise and the "Down" is rotated 90 counter-clockwise.Anyone else experience this?
Anyone have a solution/remedy?
pano2vr cubestrip must be read or set in a different orientation. krpano has its own cubestrip maker droplet. try that and you will probably be ok. it in the tools download.
Have you tried using the rotate features for cubestrips?
<image type="CUBESTRIP">
<cubestrip url="cubestrip.jpg" />
<left strip="0" rotate="0" flip="" />
<front strip="1" rotate="0" flip="" />
<right strip="2" rotate="0" flip="" />
<back strip="3" rotate="0" flip="" />
<up strip="4" rotate="0" flip="" />
<down strip="5" rotate="0" flip="" />
</image>
VIN2009 and Jarredja,
Thanks for the replies.
I'll give both a shot later today.
Don’t have an account yet? Register yourself now and be a part of our community!