Hello, I'm by no means a programmer or developer but my web
programmer decided on Krpano as our viewer. I shoot mostly real estate and have
gotten nothing but complaints from my clients regarding the poor image quality
of our panos. My fear is that I'm going to start losing a majority of my
clients/business if I cannot get this problem resolved immediately. My
programmer seems a bit reluctant to look into the matter and see if it
can be resolved so I'm trying to get some help here. If someone could please
take a look at our demo and make some suggestions on how we can improve the
image quality by getting rid of the wavy lines I'd really appreciate it. Our
designer says there’s nothing that can be done until Krpano updates their
version and also when Flash 9 or 10 comes out. If this is not true I'd like to know.





You can see our little disaster in action here http://www.gyvdemo.com





Thank you!

Here is a 6x1 Cubic Face Strip in our Hot spot Editor



Here is an Equirectangular image in our Hot spot Editor. As you can see the equirectangular image displays a complete layout for adding hotspots whereas the cubic pano faces appears a bit more confusing at a glance so my questions are:

1) Is there a way to get the cubic to display a more natural image for adding hot spots?

2) We appear to be limited to being able to add hotspots (both cubic and equirectangular) at a 0 degree level. Is there a way to change this so we can add hotspots to higher and lower areas?

Also we've upgraded to the latest version of KRPano and have abandoned the equirectangular image for a 6x1 cubic face strip pano which seems to load faster and provide a much better image quality at a smaller size than the previous equirectangular panos however we are no having an issue with the hotspots. When the hotspot is clicked the zoom goes down to the tripod or pano cap instead of the desired loaction. My programmer claims he has double checked the code and can see no errors so we're at a loss. Any advice or help is much appreciated. Here is an example of the issues we're having with the cubic hotspots http://tours.getyourview.com/property/550 The equirectangular hotspots do not have this issue with the zooming down onto the tripod.


As mentioned in my previous message I am not a programmer I just trying to get answers for my programmer. Any help you guys can provide is much appreciated.

Thanks you for all your feedback on our previous issue.

Robert:



Thanks for your help I'll forward this info onto our programer. As for the the outside view I didn't have to do anything since it was an even light inside and out so no masking or cutting was required however I did bracket the images. In most cases where the interior is darker than the outside I will either cut, use vector masks or layer and delicately erase unwanted material. I never use a flash or a strobe with any of my work, well I try not to. I'm curious to see what other people have to say about how they get clear interior and exterior images i.e. . Please post your ideas everyone cause this subject seems be a bit mysterious on the web and finding answers a bit difficult.



Thanks for your help.