Sie sind nicht angemeldet.

Straight lines appear wavy 1.0.8-beta8

Lieber Besucher, herzlich willkommen bei: krpano.com Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

rinks

Schüler

  • »rinks« ist der Autor dieses Themas

Beiträge: 95

  • Nachricht senden

1

Montag, 15. Juni 2009, 19:50

Straight lines appear wavy 1.0.8-beta8

I read some post which mentioned this problem along with solution but now I cant find that post.
I have 1.0.8 beta 8, straight lines appear wavy in the running pano, what is causing this?

rinks

Schüler

  • »rinks« ist der Autor dieses Themas

Beiträge: 95

  • Nachricht senden

2

Montag, 15. Juni 2009, 19:55

Ok just after posting this I found the "similar thread" at the bottom of this post.
Curved straight lines in finished panorama

Zitat

for the best quality I would recommend using the 1.0.8 beta
and also converting the pano to a cubical one
I did not convert the image to cube that might be the issue, will try with cube & test.

VN2009

Profi

Beiträge: 1 336

Wohnort: Duluth MN

  • Nachricht senden

3

Montag, 15. Juni 2009, 23:19

i never use cube. and have not seen any such issues in any of my panos. i would verify your display settings. turn flash 10 on. set details to at least 24 maybe as high as 32. set still quality to highsharp. that is most likey the cause.

VN2009

Profi

Beiträge: 1 336

Wohnort: Duluth MN

  • Nachricht senden

4

Montag, 15. Juni 2009, 23:20

i never use cube. and have not seen any such issues in any of my panos. i would verify your display settings. turn flash 10 on. set details to at least 24 maybe as high as 32. set still quality to highsharp. that is most likey the cause. try this ...


<display

fps="40"
details="32"
tessmode="-1"
movequality="LOW"
stillquality="HIGH"
flash10="on"
movequality10="HIGH"
stillquality10="HIGH"
stilltime="0.25"
/>

rinks

Schüler

  • »rinks« ist der Autor dieses Themas

Beiträge: 95

  • Nachricht senden

5

Dienstag, 16. Juni 2009, 02:16

Should that code be there by default?
It was not there in the xml file so I added & the problem is gone, but now I notice that the pano is not so smooth & it drags bit slowly & using higher CPU cycles almost 100%, is that suppose to happen when using flash 10?
Thanks VN2009 *smile*

For other who have this problem I am quoting klaus from another post

Zitat

there can be a few reasons for such waves:

1. a spherical pano with too low details settings,
have a look for every details setting in every xml, it can be also set for a <level> node,

2. a cubical pano without Flash10 (krpano 1.0.7 or lower) and low details setting

3. a cubical pano with Flash10 low details setting and enabled fisheye effect,

Flash needs to split the image into many small parts for correct 3D displaying,
the more parts the more accurate, this is controlled with the details setting,

only with Flash10 (krpano 1.0.8) and cubical panos, this splitting is not needed,
then the image should be perfect,

try downloading here to latest tool version:
http://krpano.com/download/beta/

and convert the pano first to a cubical with the SPHERE to CUBE droplet,
and then drop the converted 6 sides onto the kmakemultires droplet,
then there shouldn't be any waves/ripples anymore

best regards,
Klaus

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »rinks« (16. Juni 2009, 02:28)

Ähnliche Themen