vrTourSoft - the krpano GUI. Add hotspots, layers, html pages, lightboxes, menu, animations, maps, sounds, videos, galleries and much more...

vrTourSoft · November 5, 2019 at 11:51 PM

vrTourSoft https://www.vrtoursoft.com/</a>
The standalone application with an integrated server that allows you to create and edit virtual tours or single panorama, add a variety of information saturation and functions, change appearance for all elements.
This is a WYSIWYG editor with an intuitive interface that allows you to create a virtual tour both in fully automatic mode and in direct code editing mode. All changes you can immediately see in the internal browser.

Free use of the program for 3 days.

vrTourSoft is a set of editors:

https://www.vrtoursoft.com/editors/create.html - Create tour editor

https://www.vrtoursoft.com/editors/toursettings.html - Tour settings editor

https://www.vrtoursoft.com/editors/scenesettings.html - Scene settings editor

https://www.vrtoursoft.com/editors/layer.html - Layer editor

https://www.vrtoursoft.com/editors/hotspoteditor.html Hotspot editor

https://www.vrtoursoft.com/editors/menu.html - Menu editor

https://www.vrtoursoft.com/editors/map.html - Map editor

https://www.vrtoursoft.com/editors/video.html - Video and presentation editor

https://www.vrtoursoft.com/editors/videorecord.html - Video Record

https://www.vrtoursoft.com/editors/autoshow.html - Create AutoShow

https://www.vrtoursoft.com/editors/audio.html - Audio editor

https://www.vrtoursoft.com/editors/gallery.html - Gallery editor

https://www.vrtoursoft.com/editors/image.html - Image editor

https://www.vrtoursoft.com/editors/infobox.html</a>http://<woltlab-metacode-marker data-name="size" data-uuid="37f9fcdb-22dc-408f-9872-da29523b4eeb" data-source="W3NpemU9MTBd" data-attributes="WyIxMCJd" /><woltlab-metacode-marker data-uuid="37f9fcdb-22dc-408f-9872-da29523b4eeb" data-source="Wy9zaXplXQ==" /> - Html-page (info) editor

https://www.vrtoursoft.com/editors/social.html - Social share plugin

https://www.vrtoursoft.com/editors/google.html - Google Analitic plugin

https://www.vrtoursoft.com/editors/extraskin.html - Extra skin functions

https://www.vrtoursoft.com/editors/publish.html - Publish editor

https://www.vrtoursoft.com/editors/othertools.html - Other Tools

https://www.vrtoursoft.com/editors/faq.html - FAQ

Alexey Tkachenko · November 8, 2019 at 10:08 AM

Hi)

I wanted to check out the trial version and I downloaded the .zip archive (Win 10, 64 bit) and then after unzipping I launch "vrTourSoft.exe" and enter the trial version licence code and press "REGISTER KEY", but nothing happens...

I tried both pasting the license code and typing it manually.

What am I doing wrong?

vrTourSoft · November 8, 2019 at 2:18 PM

Quote from Alexey Tkachenko

I wanted to check out the trial version and I downloaded the .zip archive (Win 10, 64 bit) and then after unzipping I launch "vrTourSoft.exe" and enter the trial version licence code and press "REGISTER KEY", but nothing happens...

Hi Alexey!
Thanks for your post.
Try it once again.

volkoff69 · November 9, 2019 at 11:43 AM

Great job!
You have solved most of my problems. I never thought it was possible to create virtual tours so easily, quickly and simply.

AlexRu71 · November 12, 2019 at 6:31 PM

Hello to all!
I wanted to say thanks to the developers. I have been working in a krpano for a long time and can do a lot myself.
But this program allows you to do in a few minutes what I usually spend hours of tedious work on.
It’s also nice that all my code works. You can simply open xml and edit everything directly.

AlexFotoGraf · November 15, 2019 at 6:20 AM

Hi, everyone!
I have bought this program recently and I am very
pleased by this purchase, because it is really well developed program
and very easy to use. In addition, it has a large variety of different
functions and helps me to save my time. I highly recommend everyone
using this useful program.

vrTourSoft · November 15, 2019 at 11:08 AM

Hotspot editor

Hotspot editor is the set of tools that allows to place, edit and remove all possible types of the hotspots in virtual tour.
All changes for hotspot you test in internal browser in real-time mode.
The program will process and add to the tour all the necessary files and generates code.

About
- Hotspot editor is the main tool for adding hotspots - active elements that rotate with the panorama (have angular coordinates).
- It allows you to add and edit all possible types of hotspots.
- The number of hotspots in the panorama is unlimited.
- The editor allows you to set the value for any hotspot's attribute.
- In the editing process, all changes are immediately visible in the browser due to the dynamic assignment of attributes.
- When you click save, the following happens:
  - The program inserts all the necessary code fragments and saves the changes.
  - The program copies the necessary files to the tour, such as images, if necessary.
  - The program edits files, for example, resizes images, optimizes images for the web, converts video, prepares posters, etc., if necessary.
- The hotspot editing mode allows you to change any value for hotspot at any time. It is impossible to change only the type of hotspot.
- Delete mode allows you to quickly remove all unnecessary hotspots.
- Hotspot editor has 4 panels:
  - Main panel
  - Hotspot type panel
  - Direct attribute edit panel
  - Delete hotspot panel
Main panel.
- When you start to place or start to edit a hotspot appears main panel:
- The main panel allows:
  - Start to place hotspot.Place hotspot.
  - Select a type for a new hotspot. Either in top menu or in main panel. This will start to place it.
  - The panel for specific type of hotspot will be open.
  - Follow the instructions for this type of hotspot to set its properties.
  - Select an action for hotspot mouse clicks.
    - Ten built-in actions are available.
    - You can enter your own action through the custom action tab.
  - For desktop computers, assign tooltip.
    - If you use the actions loadscene or load scene with set view, the program will offer the title of the panorama as a tooltip.
  - Save the hotspot.
  Note: If before you click the save button, you select another type of hotspot or click cancel, the hotspot will be deleted and all changes for it will be lost.
  Edit hotspot.
  - If the main panel is closed, select edit in the top menu. This will open main panel.
  - If the main panel is open, immediately click the "select hotspot" button.
  - Click the hotspot you want to edit on the monitor screen.
  - The name of the hotspot, the action and tooltip assigned to it will appear in the main panel.
  - The program will automatically detect the hotspot type, open the corresponding panel and fill the values of the parameters.
  - Follow the instructions for this type of hotspot to set its properties.
  - Change any parameter available for this type.
  - Save or discard changes.
  .
  Hotspot actions
  - Hotspot editor allows to apply any action to the hotspot.
  - Available 10 in-build actions. The program automatically generates code for them.
    - Load scene
    - Load scene with set view
    - Show image
    - Info relative width (%)
    - Info absolute width (px)
    - Open url
    - Show gallery
    - Show plan
    - Show inbuilt video
    - Show youtube video
    - Custom action
  - Use any user action on your choice. Write it in custom action text box.
  - Edit hotspot action at any time.
  Note:
  - You can assign onover, onhover, onout, ondow, onup, onloaded, etc... hotspot actions.
    - Save the hotspot.
    - Assign these actions via direct attribute edit panel.
  - You can call JS as custom action: js(actionName);
  How to use:
  - Select action for hotspot from the drop-down menu.
  - Follow the program steps to create action.
  - Click save.
  - The program automatically generates code for action and place it in the window under the drop-down list. No need to make corrections.
  - To assign another action, select a new action in the drop-down list and repeat the steps.
  Tooltip (text onhover)
  - The tooltip works only on desktops where the mouseover event occurs.
  - Write any text that will be appears as tooltip, when mouse will be onhover hotspot.
  - When you select "Load scene" or "Load scene with set view", the program will fill tooltip with pano title. Write other text if necessary.
  - To avoid tooltip leave text box empty.
  - For hotspot actions "Load scene" and "Load scene with set view". Tooltip appears with scene thumb and text (tooltip with image).
  - For other hotspot actions . Tooltip appears with text.
  - How to change appearance of tooltip look Save hotspot.
    - When you put a new hotspot or edit an already created, all changes occur only on the screen.
    - Click save to add changes to the tour.
    - When you click save, the following happens:
      - Hotpot is added to the current panorama.
      - Hotspot attributes get the values that were assigned during editing.
      - For image and flyout hotspot images will be copied to the tour, if they are not in image folder.
      - Images will be optimized for the web and resized, if you choose the resize option.
      - Hotspot type panel will disappear.
      - Hotspot will be unavailable for editing.
    - To re-edit the hotspot, click "hotspot select" and click on the desired hotspot.
    - If you press the cancel button, all changes will be lost. Hotspot editor will be closed.
    - If during editing of the new hotspot you select other type, all changes will be lost. New hotspot disappears from the screen.
    Hotspot actions
    [list]
  - Hotspot actions is placed in tcreator.xml
  - tcreator.xml is the closed part of the vrTourSoft. It is contained actions that serves the correct work of the program.
  - It is possible to overwrite hotspot actions.
  - Write the action with the same name as defined in program. Placed it in tour xml after the including of tcreator.xml
  - Look action parameters in the original actions.
  Actions names and parameters:
  [list=1]
- Load scene with set view - loadSceneSetView(scene_name,hlookat,vlookat,fov);
- Show image - sphotoLarge(url);
- Info relative width (%) - infobox_pct(info_name,width_in_%);
- Info absolute width (px) - infobox_px(info_name,width_in_px);
- Open url - openurl(url);
- Show gallery - buildgallery(gallery_name);
- Show plan - openPlan(plan_name);
- Show inbuilt video - videoplayer_open(url.mp4|url.webm,posterurl.jpeg,soundvolume);
- Show youtube video - youtubeplayer_open(link);
Note:
[list]
Links for tcreator.xml is necessary for right work of the tour.
It is possible to create custom openstyles.xml with own styles and actions. In different projects replace the default one.
After tour is finished it is possible to remove classiceds.js (and link for it). It have no functions in work of ready tour.

indexofrefraction · November 15, 2019 at 2:41 PM

So many new Users in this Forum.. Welcome!

vrTourSoft · November 16, 2019 at 5:23 PM

Layer editor

Layer editor is the main tool to add, edit and delete layers to the tour.
All changes for layer you test in internal browser in real-time mode.
The program will process and add to the tour all the necessary files and generates code.

About.
- Layer editor is the main tool for adding layers - active elements that do not rotate with the panorama (have absolute coordinates).
- The layers allows to add your own buttons, create your own interface, add design elements, insert information, etc.
- Layer editor allows you to add and edit all possible types of layers:
  - Image layer
  - Text layer
  - Container layer
- The number of layers in the panorama is unlimited.
- You can add a layer:
  - to the whole tour
  - to a specific panorama.
- The editor allows you to set the value for any layer's attribute.
- In the editing process, all changes are immediately visible in the browser due to the dynamic assignment of attributes.
- When you click save, the following happens:
  - The program inserts all the necessary code fragments and saves the changes.
  - The program copies the necessary files to the tour, such as images, if necessary.
  - The program edits files. For example, resizes images, optimizes images for the web, prepares thumbs, etc., if necessary.
- In the editor there are three types of panels for each type of layer.
- When you create a new layer or select a layer to edit, the corresponding panel opens.
  - The panel allows you to change any value for layer at any time. It is impossible to change only the type of layer.
  - The panel allows you to delete layer.
- The layer editor has 24 built-in actions:
  - 11 actions - allows to call interactive constructions
  - 12 actions - are useful to create your own interface
  - custom action - allows to call your own action
- Drag-and-drop the layer editor panel on the screen.
Image layer
- Layer editor allows to place any image from system as image layer.
- Layer editor will process image, resize it (if order), copy it to the tour and generate code for layer.
- Available formats .jpeg,.png,.gif,.targa
- All changes you will see on the screen.
- Add a layer:
  - to the whole tour
  - to a specific panorama.
- In real-time mode select or change settings for image layers:
  - image
  - action
  - position
  - parent
  - size
  - alpha
  - rotate
  - direct attribute settings
How to place:
- Select the image layer in the top menu.
- In the open file dialog, select an image.
- The image appears by default in the upper left corner.
- Select align. Text layer
  - Text layers use a textfield plugin to place text as layer.
  - Layer editor allows you to place 3 types of text layers inside the tour:
    - simple text
    - internal html page (complex text)
    - external html page
  - Add a layer:
    - to the whole tour
    - to a specific panorama.
  - In real-time mode select or change settings for text layers:
    - text
    - action
    - position
    - parent
    - size
    - alpha
    - rotate
    - direct attribute settings
  - Built-in style editor for text layer.
    - By default, a layer appears with the same settings as the skin (skin/http://openstyles.xml/textlayerstyle1).
    - Create new style in a few clicks. Assign values for the font and background
    - The style will be saved in skin/openstyles.xml.
    - The number of styles is not limited.
    - Select the style from the drop-down list and apply it to the layer.
    - The number of layers with the same style is not limited.
  - Set the width of the text layer:
    - in pixels
    - in percent
  - The program will calculate the height automatically (autoheight="true"). Reorder height if you need.
  - Any attribute can be assigned a new value via direct attribute edit.
  - All changes you will see on the screen.
  How to place:
  - Select the text layer in the top menu.
  - The text layer appears by default in the upper left corner.
  - Enter or select text value:
    - simple text - directly enter text or character in the text input box.
    - internal html page (complex text) - select from the drop-down list info with internal html. Read how to external html page - select from the drop-down list info with link to iframe. Read how to Create/ edit text layer style.
      - Select "create style".
      - For the font select:
        font size
        font color
      - For background select:
        color
        alpha
      - For the border select:
        color
        width
      - Select roundedge.
      - Press save style.
      - Edit or delete at any time.
      - The style will be saved in skin/openstyles.xml.
      - The program will add style to the drop-down list.
      Container layer.
      - Container is the special type of layers that allows to group other layers within it.
      - You can put all types of layers inside the container:
        image layers
        text layers
        other containers
      - In order to include a layer in a container, you need to assign this container as a parent for this layer.
      - The number of containers inside the tour is not limited.
      - The number of layers within the group is not limited.
      - The coordinates of the layers inside the group are calculated from the rectangle of the container.
      - The container does not produce any events.
      - The events produce the layers inside the container.
      - The container allows you to control the behavior of the group of layers within it. Set position, movement, alpha, visibie, enable, etc.
      - Add container:
        to the whole tour
        to a specific panorama.
      - In real-time mode select or change settings for container layers:
        design
        position
        parent
        size
        direct attribute settings
      - Set the width and the height of the container layer:
        in pixels
        in percent
        mix pixels and percent
      - Any attribute can be assigned a new value via direct attribute edit.
      - All changes you will see on the screen.
      - Containers are useful to create group of buttons, custom skin, user interfaces, maps, information pages, galleries, etc.
      - The program have the expnd set of build-in actions for layers. This allows to create custom skin with various set of buttons.
      - In order to create your own skin, collect all the buttons in a container and name it customskin. In this case, you can use the pre-defind action hideCustomMenu(); in order to remove/restore all items on the screen.
      How to place:
      - Select layer container in top menu.
      - The container appears by default in the upper left corner.
      - Select align. Read more. By default, the coordinates are calculated from the top left.
      - Select the parent:
        tour
        current panorama
        layer container
      - Position the layer. Set the x and y coordinates.
      - Scale container. Enter the value for width and height:
        in pixels
        in percent
        mix pixels and percent
      - Create design for container:
        background:
        alpha
        color
        background border:
        alpha
        color
        border width
        roundedge
      - Set directly any attribute value. Edit layer
        
        Select "edit layer" in top menu.
        Click on the layer you want to edit.
        The layer name will appear in text box.
        Press start edit.
        The program will open corresponding panel and fill all the fields.
        Edit container
        Select "edit container" in top menu.
        Select container from the drop-down list.
        Press start edit.
        The program will open corresponding panel and fill all the fields.
        Layer position
        The position of the layer on the screen is determined by 2 parameters:
        align
        x and y coordinates
        Align - the origin of coordinates.
        The x and y coordinates are automatically calculated from the selected value of the origin.
        x - offset x
        y - offset y
        The following values are available:
        topleft
        top
        topright
        left
        center
        right
        bottomleft
        bottom
        bottomright
        Default value - topleft.
        The x and y shift are automatically calculated from the selected value of the origin.
        For a layer located inside the container, the coordinates are calculated from the rectangle of the container.
        How to use:
        Select align from the drop-down list.
        Default value - topleft.
        When you change the align value, the x and y shift are automatically calculated from the selected value of the origin.
        Drag-and-drop layer. Or directly enter the value of x and y coordinates.
        All changes you see on the screen.
        
        Layer parent
        Parent attribute defines inside which xml node this layer will be located (what will be the parent).
        This determines:
        visibility of the layer in different panoramas
        origin for layer coordinates
        There are three possible values for parent:
        tour
        specific panorama (current scene)
        container
        Parent is the tour:
        the layer is visible in all panoramas of the tour
        layer position is calculated from the panorama area
        the layer is inside specific container
        Parent is the specific panorama:
        the layer is visible only in specific panorama
        layer position is calculated from the panorama area
        the layer is inside specific scene
        Parent is the layer container:
        the layer inherits visibility from the container
        layer position is calculated from the container rectangle
        the layer is inside layer with name="tourLayers"
        How to use:
        Select parent in drop-down list.
        The program will place layer in the corresponding node when save.
        
        Layer parent allows you to show a layer in the whole tour, inside a separate panorama or place it inside the layers container (group the layers).
        To make the layer visible in all panoramas of the tour, select the tour as the parent in the drop-down list. This is the default value.
        To make the layer visible in single panorama, select this panorama as the parent.
        To place the layer inside the group, select container (group) as the parent. You must create container before.
        Layer action.
        Layer editor allows to apply any action to the layer.
        Select action from the drop-down list and following the simple instruction for this type of action.
        The program automatically generates code for the actions.
        The program allows to change the layer action at any time.
        The layer editor has 24 built-in actions:
        11 actions - allows to call interactive constructions
        Load scene
        Load scene with set view
        Show image
        Info relative width (%)
        Info absolute width (px)
        Open url
        Show gallery
        Show plan
        Show inbuilt video
        Show youtube video
        12 actions - are useful to create your own interface
        Switch fullscreen
        Switch autorotate
        Enter VR
        Hide custom menu
        Switch gyro
        Next scene
        Previous scene
        Rotate left
        Rotate right
        Rotate up
        Rotate down
        Zoom in
        Zoom out
        custom action - allows to call your own action
        Note:
        Enter any action using a custom action. For example: myaction();
        Call JS as custom action: js(actionName);
        [list]
      - Actions that concern panorama management take effect only after exiting edit mode.[list]
      - zoomin
      - zoomout
      - rotate left
      - rotate right
      - rotate up
      - rotate down
    - These actions use ondown and onup attributes to respond to a mouse click.
    - To avoid errors, try not to change this 6 values after they are assigned.
    How to use:
    [list]
  - Select action from the drop-down list.
  - Following the simple instruction for this type of action.
  - The program automatically generates code for the action.
  Direct attribute settings.
  [list]
- Allows you to set directly the value of any possible xml attribute, even if it was not previously assigned to this layer.
- All available attributes for layers look How to create a user interface
  </iframe>[list]
- In the tour settings/ tour design, select delete skin.
- Create a container for your interface.
- Create buttons of your choice.
- Buttons can be images or text.
- Select actions for buttons from the drop-down list or assign your own.
- Place the buttons in a container by designating it as the parent.
- Position the container.
Tips and tricks.
[list]
Create more than one container for the interface.
Create the main container and give it the name "customskin".
Set the width and height of the customskin container to 100%.
Set background alpha of the customskin container to 0.
Position the interface elements inside the main container.
Use the pre-defind action hideCustomMenu(); in order to remove/restore all items on the screen.
Create button with this action.

vrTourSoft · November 19, 2019 at 9:04 AM

Start create/edit.
The start tab contains a variety of tools that allows:

Start to create virtual tour.
Start to edit virtual tour.
Restore tour to control point.
Add pano to ready tour.
Remove pano from ready tour.
Rearrange panos in ready tour.
Save and open project.
Restore published tour for edit.

Create tour.
1. Select the directory where krpano tools are located (krpano Tools.exe).
2. Select panoramic images on the computer.
3. Select the folder where the virtual tour will be created.
4. Click create.
Note:
You can select the type of the tour: multires, normal, VR. The default is multires. If you do not have special purposes - leave the default settings.
Images can be in different folders.
It is not necessary to add all the panoramas to the tour at once. You can always add or remove panoramas from the ready tour.
You can create a tour in any folder where there is no subdirectory vtour. By default, the program will offer to create a tour in the folder with the last selected panorama.
Start edit tour.
1. Select the directory where krpano tools are located (krpano Tools.exe).
2. Select the html file of the tour that you will edit (tour.html).
3. Click open.
Save project.
Save project as.
When you have created or opened a tour for editing, you can save the project. The project can be saved in any directory. It will have the extension .tcrproj.
In the future, you can open the project without specifying the path to the krpano or html file.
When editing, you can restore the project to the last saved point. All intermediate steps will be deleted.
Note: This function makes sense when deleting large changes. You can edit or delete any created item at any time.
Open project (tour).
Select the file with the extension .tcrproj to open the tour for edit.
Open recent.
Click this button to open the last tour you worked on in the program. The tour may not be saved as a project.
Restore to last save.
Clicking this button will restore the tour to the last save point.
Note: Tour.httml, tour.xml and openstyles.xml will be loaded.
Open published project (tour).
Click this button and select the published project (.tcrproj) you want to restore for editing.
Note: When publishing, files tour.xml and openstyles.xml will be encrypted. In addition, viewers (tour.js and tour.swf) can be protected. All this will make the tour unavailable for editing. For more information, see the publication of the tour.
Add pano to ready tour.
1. Select panoramic images. You can choose in different folders.
2. Click add panoramas.
Note: You can add panoramas to the tour without opening it in the editor. In this case, select the tour.html and path to the krpano (krpano Tools.exe).
Remove pano from ready tour.
1. Highlight in the list the panoramas you want to delete.
2. Click delete panoramas.
Note: You can remove panoramas from the tour without opening it in the editor. In this case, select the tour.html and path to the krpano (krpano Tools.exe).
Rearrange panos in ready tour.
[list=1]
Select a panorama in the list.
Press the up or down button to change its position.
Repeat for other panoramas.
Click save.

Note: You can rearrange panos in ready tour without opening it in the editor. In this case, select the tour.html and path to the krpano (krpano Tools.exe).

Panorade · November 20, 2019 at 9:52 AM

Hello thank you for the software. It saves a lot of time. Absolutely great.
Is it possible to include such videos directly in Toursoft Creator like here
Many thanks

http://panorade.de/upload/avatar/tour1.html

vrTourSoft · November 20, 2019 at 2:34 PM

Quote from Panorade

Hello thank you for the software. It saves a lot of time. Absolutely great.
Is it possible to include such videos directly in Toursoft Creator like here
Many thanks
http://panorade.de/upload/avatar/tour1.html

Hello!
Thank you for your post
Sorry, I did not quite understand the question.
As far as I can see, you did this example in vrTourSoft. For some reason, you did not use standard tools. But the video was inserted in their own way.
The video may slow down because you inserted the container inside body teg of html document with the panorama .This is not recommended.

Specify what exactly you want to achieve?

Panorade · November 20, 2019 at 5:02 PM

Sorry it is translete from google . so i hope now i can explain it.
I hope you understand it when you watch the video.
The video (the speaker) is transparent with no background.
Yes I would like to insert the video directly into vrTourSoft Creator
Without extra scipt as I have done in the example.
like in Panotour Pro the live Video

The Video file

vrTourSoft · November 21, 2019 at 12:11 PM

Quote from Panorade

Sorry it is translete from google . so i hope now i can explain it.
I hope you understand it when you watch the video.
The video (the speaker) is transparent with no background.
Yes I would like to insert the video directly into vrTourSoft Creator
Without extra scipt as I have done in the example.
like in Panotour Pro the live Video

You can do everything in vrtrsoft that is possible in the krpano.
But you understood this by making your own example.
In one click you can add a transparent video as in this example:
https://www.vrtoursoft.com/example/video_anime/ind.htm
You can also find examples of embedding live video on the forum.
But the video editor does not currently work with live video.
We have included this in the wishlist.

Panorade · November 21, 2019 at 3:19 PM

Thanks, can you send me the complete project as a zip file?

to
info@panorade.de

vrTourSoft · November 26, 2019 at 7:42 AM

Hotspot editor.
http://www.tcreator.classic-ru.org/editors/hotspoteditor.html

The main video that explain how to work with different types of the hotspots. Place, edit, delete. Add actions, tooltips etc.. Use different panels. 20m 42s

https://youtu.be/WmFmbJlnT6s

Hotspot editor is the main tool for adding hotspots - active elements that rotate with the panorama (have angular coordinates).
It allows you to add and edit all possible types of hotspots.
The number of hotspots in the panorama is unlimited.
The editor allows you to set the value for any hotspot's attribute.
In the editing process, all changes are immediately visible in the browser due to the dynamic assignment of attributes.
When you click save, the following happens:
- The program inserts all the necessary code fragments and saves the changes.
- The program copies the necessary files to the tour, such as images, if necessary.
- The program edits files, for example, resizes images, optimizes images for the web, converts video, prepares posters, etc., if necessary.
The hotspot editing mode allows you to change any value for hotspot at any time. It is impossible to change only the type of hotspot.
Delete mode allows you to quickly remove all unnecessary hotspots.
Hotspot editor has 4 panels:
- Main panel
- Hotspot type panel
- Direct attribute edit panel
- Delete hotspot panel
read more...

vrTourSoft · December 6, 2019 at 12:32 AM

Layer editor.
https://www.vrtoursoft.com/editors/layer.html

https://youtu.be/hKvDDq2jMEw

This is the main video that explain how to work with layer editor. 12m 53s

Layer editor is the main tool for adding layers - active elements that do not rotate with the panorama (have absolute coordinates).
The layers allows to add your own buttons, create your own interface, add design elements, insert information, etc.
Layer editor allows you to add and edit all possible types of layers:
- Image layer
- Text layer
- Container layer
The number of layers in the panorama is unlimited.
You can add a layer:
- to the whole tour
- to a specific panorama.
The editor allows you to set the value for any layer's attribute.
In the editing process, all changes are immediately visible in the browser due to the dynamic assignment of attributes.
When you click save, the following happens:
- The program inserts all the necessary code fragments and saves the changes.
- The program copies the necessary files to the tour, such as images, if necessary.
- The program edits files. For example, resizes images, optimizes images for the web, prepares thumbs, etc., if necessary.
In the editor there are three types of panels for each type of layer.
When you create a new layer or select a layer to edit, the corresponding panel opens.
- The panel allows you to change any value for layer at any time. It is impossible to change only the type of layer.
- The panel allows you to delete layer.
The layer editor has 24 built-in actions:
- 11 actions - allows to call interactive constructions
- 12 actions - are useful to create your own interface
- custom action - allows to call your own action
Drag-and-drop the layer editor panel on the screen.

Participate now!