Questions about panoramic projection of 360° virtual tour

tomozoh932 · December 29, 2024 at 10:02 AM

View a 360° panoramic virtual tour.
Is it possible to revert to Equirectangler and display it on the monitor?
(Of course, set the browser resolution to 2:1)

Sorry for the difficult to understand English.
thank you!

indexofrefraction · December 29, 2024 at 10:42 AM

you cant "zoom out" from a 360 panoramic view to see the full equi.

but you can load as a flat image, for example make a separate scene

krpano.com - Documentation - XML Reference

tomozoh932 · December 29, 2024 at 11:08 AM

indexofrefraction -san.

thank you.

That way, if you want to see the spots on your current virtual tour, you will need to create the tour again.

It's a test so I don't want to waste time...

It seems that there is a device that can project Equirectangler 360 degrees, so I would like to try it out if I have a chance...

klaus.krpano · December 29, 2024 at 12:20 PM Official Post

When using a spherical pano, you could dynamically change the image.hfov/vfov setting (and call updateobject()) to switch between a spherical and flat display...

E.g. like in this example - right click and select 'Flat View':
krpano.com - Examples

If there are hotspots, their position would need to be remapped/recalculated (scale ath/atv relative to the image.hfov).

tomozoh932 · December 29, 2024 at 1:30 PM

klaus.krpano -san.

thank you.

Maybe it can't be done with multiple resolutions...

Please forgive me for not looking at the example carefully.

thank you.

indexofrefraction · December 29, 2024 at 8:26 PM

Quote from klaus.krpano

E.g. like in this example - right click and select 'Flat View':
https://krpano.com/examples/#videopano

incredible!

btw. the relevant code is in videointerface.xml

Participate now!